Is the silicone ball ice tray easy to release during the ice making process? How to ensure that the ice cubes are completely removed?
Publish Time: 2024-04-30
Silicone ball ice tray usually shows better release performance during the ice making process, which is mainly due to the special properties of silicone material. Silicone has excellent elasticity and flexibility, which makes it easier to remove the ice cubes from the ice tray after freezing.
First of all, the design of silicone ball ice tray is usually spherical or similar. This design helps the ice cubes to bear even force during the freezing process and reduces the adhesion between the ice cubes and the ice tray. At the same time, the elasticity and flexibility of the silicone material also make the ice tray less likely to break or be damaged when removing ice cubes.
In order to ensure that the ice cubes can be completely removed, we can take the following methods:
Wait for the ice cubes to melt naturally: Before taking out the ice cubes, you can wait for a period of time to allow the ice cubes to melt naturally. This will reduce the adhesion between the ice cubes and the ice tray, making it easier to remove them completely.
Soak in warm water: Soak the silicone ball ice tray in warm water for about 5 minutes. Warm water can speed up the melting of ice cubes, making it easier for the ice cubes to fall out of the ice tray. But be careful not to overheat the water to avoid burning your hands or damaging the silicone ice tray.
Gently squeeze or bend: After the ice cubes have melted slightly, you can gently squeeze or bend the Silicone ball ice tray. This method speeds up the demoulding process and also helps protect the silicone ice tray from cracking.
Use a knife or scraper: If the ice cube is difficult to remove, you can use a knife or scraper to gently cut around the ice cube. But this method requires careful operation to avoid cutting your hands with the knife or cutting the silicone ice tray.
In short, silicone ball ice tray usually shows better release performance during the ice making process. By taking appropriate measures, we can ensure that the ice cubes are removed intact while protecting the silicone ice tray from damage.
